• Hot dipped galvanised mainframe
• Stainless steel hopper and flinger assembly
• Hydraulic operated
• Engineer certified
• Compliance plate
• SWL 1000kg
• Removable guards for easy clenaout and service
• Adjustable feed rate for increased coverage

Variations

• Available in QDS
• Available in RAS

• SWL 3 tonne
• Removable skid / BA seframe for easy cleanout and service
• Removable access covers for ease of service and cleanout
• Hydraulic operated
• Both individual and simultaneously operated flinger motors
• Conveyor motor has adjustable speed controls
• Removable grid-mesh cover on top to stop rubbish from damaging conveyor
• Removable flinger motor assembly for easy service
• Heavy duty shafts used for increased duster life expectancy
• Engineer certified
• Compliance plate

Variatio

• The following standards were referenced :
  • AS3990 mechanical equipment - steelwork
  • AS3751 underground minig - slow haulage
• Trailer mass is 1900kg
• Trailer capacity is 8000kg
• Trailer ATM is 9900kg
• Towing eye has an ATM of 44 tonnes
• Label plate shows :
  • Capacity 8 tonne for DBT FBL 10C and EIMCO 130
  • Cpacity 6 tonnes EIMCO 913LHD and 913-6 LHD (ATM kg, TARE kg, Ref CMP-466)
• SWL 800kg on side of chassis 50mm letters
• Rud lugs for tie dow

• Overall dimensions 9250 L x 2450 W x 1850 W
• Capacity : 52 x 6" pipes
• Towed from both ends
• Single axle, solid rubber "bearcat tyre and wheel assembly"
• Towing hitch C/W safety chains
• Designed for EIMCO 130 LHD, ED7 and ED10 (or equivalent)
• One main operator control valve (typically the outbye end)
• 2 x independent telescopic / tilt life arms
• Strap lifter for pipes controlled with 2 x braked winches
• Side access loading with forklift or crane
• Storage area for pipe clamps, chains,

• H frame lifting beam
• Designed to pickup and place roof mesh modules
• 4 x excavator hooks for pickup of mesh
• 1 x swivel starpoint eye bolt

• QDS mesh carrier
• QDS attachment
• Engineer certified to SWL 3T
• Internal width of 1650mm
• SWL labels to indicate pod loading capacities
• Compliance plate
• 75 x 75 6 RHS section along front of pod
• Designed for tranporting mesh modules
• Mesh to overhang around 800mm-1000mm
• Tie down points

• QDS cassette racker
• Overall dimensions - 3400 L x 1100 W x 1250 H
• Hydraulic operated
• All hydraulic components guarded (all guards removable for easy access)
• Speed controls on both in and out directions of travel
• Chain assembly C/W chain shortener
• heavy duty push / pull assembly

• Overall dimensions are 2450 W x 3240 L x 1370 H
• Designed for transport of 2 x loaded cassettes
• Storage area for spare dollies, vent tube rubbers and chains, etc
• Engineer certified to SWL 5000kg

Designed to accommodate 30 metres of bolting consumables for road way development.

Overall dimensions are 3125 L x 550 W x 375 H.

SWL of 1750kg

Various designs to suit miner.

• SWL - 1500kgs
• SWL - 500kg on posts to support cable roller
• Guarding
• Fall arrest anchor point
• Bolter mount points (in floor of basket)
• Emergency brake valve
• Escape ladder fitted
• bottom section adaptable for second storey
• Grid-mesh flooring for easy cleanout
• Dimensions 2.5m x 2.5m
• 2 x side access self-closing gates
• Engineer certified
• Compliance plate
• Plant number (if required)

Variations

• 2nd storey
• HT cable arm